Thứ Tư, 18 tháng 5, 2011

Sleeping secret

A  In 1846, a Bostonian dentist called William Morton removed a tumour from the neck of a newspaper printer to whom he had administered ether. The printer felt no pain. Ever since then, doctors have been frying to fathom exactly what causes the curious state of unconsciousness, now known as anaesthesia, into which he lapsed.
For a long time, researchers in the field believed that anaesthetics worked by dissolving in the fatty sheaths that insulate nerves. This, it was theorized, caused them to interfere with the electrical signals that pass along those nerves. Since one of the few things that anaesthetic chemicals seemed to have in common was a tendency to dissolve in fats, and their solubility was related to their effectiveness, that hypothesis looked good until the suggested electrical effects were measured in the 1980s and discovered to be too small.
C  At around that time, however, another idea was becoming popular. This was that anaesthetics combine with critical proteins in the central nervous system and bring them — and consciousness — grinding to a halt. Subsequent research1222136573461sleeping_baby_by_bastherself.jpg has shown that anaesthetics can, indeed, bind to protein molecules, and can sometimes affect their function as a result. But nobody has yet identified the elusive proteins involved anaesthesia. In October, however, Roderic Eckenhoff, an anaesthesiologist at the University of Pennsylvania, will publish a paper that may bring that identification closer. Though he has not found the guilty proteins, he thinks he knows something important about their characteristics, and thus how anaesthetics perform their trick.
D  Proteins consist of long chains of chemical links known as amino acids. These chains, however, are usually folded up into more or less globular shapes which are held steady by weak chemical bonds between adjacent parts of the chain.
E   Since the shape of a protein is critical to its function (particularly if it has a precisely sculpted docking port for other molecules to enter). Dr. Eckenhoff suspected that anaesthetics work by changing the stability of the folding of a particular protein, thus affecting how well that protein does its job. Anaesthetics might achieve this either by making the shape of a protein so stable taht it cannot flex in response to docking and undocking molecules, or so unstable that the docking port loses its shape. The test of this theory, to be published in October’s Molecular Pharmacology, looked at two proteins (albumin and myoglobin) which have nothing directly to do with anaesthesia, but which are easy to extract in large quantities for experiments.
F  Dr. Eckenhoff’s previous work has shown that when an anaesthetic molecule such as isoflurane binds to albumin (a component of blood), the protein becomes more settled in its folded pattern. This means that anaesthetics are less likely to stick to it if it is destabilized. By contrast he showed that myoglobin (a component of muscle) opens up and becomes less stable when it hosts a molecule of isoflurane — which means that anaesthetics are more likely to stick to it if it is destabilized.
G  Since it is one of the characteristics of anaesthesia that its effectiveness weakens with temperature and pressure. Dr. Eckenhoff wanted to examine the effects of these two variables on the proteins in question. Raising the temperature destabilized both proteins (no great suprise, given that molecules, shake more when they are hotter). So did increasing the pressure. But Dr. Eckenhoff was able to measure the precise amount of destabilization by carrying the experiments out in water containing a radioactive form of hydrogen called tritium.
H  In the normal course of events, a protein molecule will swap hydrogen atoms with the surrounding water from time to time — and if that molecule has been partially unfolded, there will be more hydrogen available to swap, since atoms on the inside as well as the outside of the globule will be available for exchange. The extent to which a protein has been destabilized can, therefore, be measured by how radioactive it becomes in a given period of time.
I  The stability curves for an albumin at different temperatures and pressures turn out to have the same sort of shape as the curves for the effectiveness of anaesthetics (those of myoglobin do not match at all). And two other lines of evidence from the paper also indicate that the proteins involved in anaesthesia have albumin-like qualities.
J  One is that only albumin responds to changes in the concentration of isoflurane in the way that would be predicted if it were acting like a protein responding to anaesthesia. The other is the response of albumin to different forms of isoflurane.
K  The isoflurane molecule comes in two varieties, which are mirror images of each other. For most chemical purposes the varieties are identical, but anaesthesia can tell the difference — and one is more potent than the other. Dr. Eckenhoff has found that the more potent variety binds more strongly to albumin, but not to myoglobin.
L  Anaesthesia, therefore, seems to work by stabilizing rather than destabilizing critical proteins. But which ones? The most likely candidates are the protein receptors of the small chemical messengers (known as neurotransmitters) which carry signals from one nerve cell to another at special sites called synapses. Work on glutamate receptors, which are responsible for simulating the brain, suggests that these are, indeed, inhibited by anaesthetics. But in contrast to this, John Mihic of the University of Colorado and his colleagues have recently made a case for anaesthetics working by increasing rather than decreasing the effects of receptor molecules — in this case the receptors for GABA and glycine, two neurotransmitters that calm down excited synapses. How that fits in with the Eckenhoff model remains to be seen. Clearly, however, anaesthesia has not given up all of its secrets yet.


The above reading passage has twelve paragraphs A – L. Choose the most suitable headings for paragraphs B – L from the list of headings below. Write the appropriate numbers (1-14) in the spaces provided.
NB: There are more headings than the paragraphs so you will not use all of them. You may use any of the headings more than once.
List of headings
1. Proteins might play a part in anaesthesia2. How to measure a protein’s destabilization
3. A hypothesis held before the 1980s
4. Findings made by Dr. Eckenhoff
5. Different potency of isofluranes’ two varieties
6. The proteins have albumin-like qualities
7. Shapes of proteins
8. How anaesthesia works – still a puzzle
9. The two evidences showing the proteins’ albumin-like quality

10. Effect of the two variables on proteins
11. Anaesthetics and insomnia
12. Two conflicting theories
13. Dr. Eckenhoff’s theory
14. Ill effects of anaesthesia
 Đáp án: A.8; B.3; C.1; D.7; E.8; F.4; G.10; H.2; J.6; K.5;L.12


Energy from Biological sources

A Radiation from the sun is the earth’s primary source of energy. More than 99 per cent of the processes that are happening on earth are energized by the sun either directly or indirectly. As solar radiation is a permanent and renewable source of energy, why, then, do we have an “energy crisis”? The problem, of course, lies in how to utilize this energy. It is diffuse and intermittent on a daily and seasonal basis, thus collection and storage costs can be high. But we already have at our disposal a means of capturing and storing a proportion of this energy, and we have always had such a means. It is plant life — the “biomass”. The process involved is photosynthesis.
B This capture of solar energy and conversion into a stored product occurs, with only a low overall efficiency of about 0.1 per cent on a world-wide basis but because of the adaptability of plants, it takes place and can be used over most of the earth.
C We should remember two things about this energy source. First, the world’s present and precarious dependence on fossil fuels — first coal, and then oil — is only about two hundred years old. Before that, most of the energy required by human beings for heating, cooking and industrial purpose was supplied from biological sources. By this, we mean mainly wood, or its derivative, charcoal. Secondly, wood still accounts for one sixth of the world’s fuel supply. In the non-OPEC developing countries, which contain 40 per cent of the world’s population, non-commercial fuel often comprises up to 90 per cent of their total energy use. With the increasingly doubtful future of fossil fuel supplies, fuel from biological sources may have to become even more important.
D Traditional fuels of biological origin include wood, charcoal, agricultural residues such as straw and dried animal dung. With the growth in world population, there has been increasing pressure on these resources, leading to what is sometimes called the “second energy crisis”. This is more drastic far mankind than the “first”, or oil crisis. It takes the form of deforestation, with loss of green cover its hot lands, leading to desiccation and the loss of fertile land to desert.
E The threat from both energy crises can be partly met by utilizing the enormous supply of energy built up annually in green plants. The question is, how should this be done? In the past, photosynthesis has given us food, fuel wood, fibre and chemicals. It has also, ultimately, given us the fossil fuels — coal, oil and natural gas, but these are not renewable while the other products are. Recently, however, with abundant oil, the products of present-day photosynthesis are mainly evident to the developed world as food. We should re-examine and, if possible, re-employ the previous systems; but, with today’s increased population and standard of living, we cannot revert to old technology and must instead develop new means of using present-day photosynthetic systems more efficiently.
F Fortunately for us, plants are very adaptable and exist in great diversity — they could thus continue indefinitely to supply us with renewable quantities of food, fibre, fuel and chemicals. If the impending fuel problem which is predicted within the next ten to fifteen years comes about, we may turn to plant products sooner than we expect. Let us be prepared!
G Some basic research can be done centrally, without reference to the conditions in any one country. For example, all plant energy storage depends ultimately on the process of photosynthesis. Experiments are being made to see whether this process can either be speeded up, or even reproduced artificially, in order to produce a higher efficiency in energy extraction. Mast research should be done locally, however, because of climatic and vegetation differences, and also because of the difference in needs and emphasis in varying countries. Such research and development is an excellent opportunity to encourage local scientists, engineers and administrators in one field of energy supply. Even if biomass systems do not become significant suppliers of energy in a specific country in the future, the spin-off in terms of benefits to agriculture, forestry, land use patterns and bioconversion technology is certain to be valuable.

H What are the methods currently in use or under trial for deriving energy from biomass? The first is the traditional use outlined in paragraph C, which may be termed the “non-commercial” use of biomass energy. The second also has a long traditional history: the use of wood-fuel under boilers to generate steam. This has now been revised on an intensive scale. In a study from the Philippines, it has been estimated that a 9,100 hectare fuel wood plantation “would supply the needs of a 75 megawatt steam power station if it were not more than fifty kilometres distant”. Such a platation would use a species of fast-growing tree — leucaena leucocephala, or the giant “ipil-ipil”. The investment requirements and cost of power produced looks favourable and competitive with oil-fired power stations of similar capacity. In addition, residues from cropland after harvest and from sawmills could be used as steam- producing fuel. The steam could then be used to generate electricity.

I There are also bioconversion processes to produce liquid fuels such as oil and alcohol. Some fuel oils can be pressed directly from certain crops. Alcohols, on the other hand, can be produced by converting plant material by fermentation. Ethanol (ethyl alcohol) can be extracted from growing plants such as sugar cane, from waste plant material, or from whole grain. Methanol (methyl alcohol) can be produced from coal, wood, sewage and various waste products. These alcohols have several industrial uses and can also be used as fuels in the internal combustion engines of vehicles. Technology is already advanced, and the main problem is devising ways of collecting enough organic material to make the installations commercially viable. Some crops can be grown specifically for this purpose. In other cases, the installations can make use of the residue, or “trash” produced in the large-scale plantation farming of such crops as sugar cane and pineapple. Another fuel product produced by a fermentation process is fuel gas of various kinds, including a biogas called methane. Several of these processes can be applied to household or municipal wastes and refuse — a large and concentrated source in all big towns and cities.
 




The above reading passage has nine paragraphs A – I. Choose the most suitable headings for paragraphs B – I from the list of headings below. Write the appropriate numbers (1-10) in the spaces provided.NB: There are more headings than the paragraphs so you will not use all of them. You may use any of the headings more than once.
List of heading
1. Fuels from biological sources6. Plant power
2. Research and development into biomass systems7. Efficiency of the solar conversion process
3. Solar energy and its utilization8. Tree biomass
4. The energy crisis and photosynthetic systems9. Other forms of renewable energy
5. The second energy crisis10. Liquid and gaseous fuels from biomass
 


 Đáp án: A. 3; B.7; C.1; D.5; E.4; F. 6;  G.2; H.8; I.10